Aluminum Copper da nau'in Bimetallic Connectors
Bayanan Fasaha
| Samfura | Mai Gudanarwa Cross-Section (mm2) Tare da 6-50 Al 16-70 | Bolts |
| Bayani na CAPG-A1 | Tare da 10-95 Al 25-150 | 1×M8×40 |
| CAPG-A2 | Tare da 6-50 Al 16-70 | 1×M8×45 |
| Saukewa: CAPG-B1 | Tare da 10-95 Al 25-150 | 2×M8×45 |
| Saukewa: CAPG-B2 | Tare da 25-185 Al 35-200 | 2×M8×50 |
| Saukewa: CAPG-B3 | Tare da 6-50 Al 16-70 | 2×M10×60 |
| Saukewa: CAPG-C1 | Tare da 10-95 Al 25-150 | 3×M8×45 |
| Saukewa: CAPG-C2 | Tare da 25-185 Al 35-240 | 3×M8×50 |
| Saukewa: CAPG-C3 | Tare da 35-240 Al 35-300 | 3×M10×60 |
| Bayani na CAPG-C4 | 3×M10×70 |
Kayan abu
Ƙarfin aluminum gami da ƙirƙira.Maganin saman: haske.
Kayan samfur
Ana amfani da ALPG don haɗawa ko reshe AAC, AAAC ko ACSR madugu na sama.Ƙirƙirar ƙirƙira mai ƙarfi mai ƙarfi.Ramin ramuka suna ba da damar daidaitawa ga masu gudanarwa daban-daban a kowane gefe.Nau'in gwajin sa yana daidai da IEC61238-1.
Bayanan Fasaha
| Samfura | Mai Gudanarwa Cross-Section (mm2) | Bolts |
| Saukewa: APG-A1 | shafi na 16-70 | 1×M8×40 |
| Saukewa: APG-A2 | shafi na 16-150 | 1×M8×45 |
| Saukewa: APG-B1 | Na 16-35 | 2×M6×35 |
| Saukewa: APG-B2 | shafi na 16-70 | 2×M8×45 |
| Saukewa: APG-B3 | shafi na 16-150 | 2×M8×50 |
| Saukewa: APG-B4 | shafi na 25-185 | 2×M10×60 |
| Saukewa: APG-C1 | shafi na 16-70 | 3×M8×45 |
| Saukewa: APG-C2 | shafi na 16-150 | 3×M8×50 |
| Saukewa: APG-C3 | Al 25-240 | 3×M10×60 |
| Saukewa: APG-C4 | Al 35-300 | 3×M10×70 |
Parallel Groove Clamps Copper Extruded nau'in
An ƙera maƙallan don haɗa madugu biyu masu kama da juna.Masu gudanarwa na iya zama madaurin jan ƙarfe ko sanduna.An ƙirƙira kayan tagulla don haɗin tagulla zuwa tagulla a cikin kewayon jagora.Makusan sun ƙera madaidaicin ramuka don iyakar hulɗar madugu, yi amfani da kusoshi na jan karfe kuma suna amfani da wankin Belleville don hana haɓakar zafi a ƙarƙashin nauyin hawan keke.An lulluɓe maƙallan tare da mai hana oxide.Kuma bakin karfe da goro tare da wanki yana kan buƙata.
Don haɗin famfo na jan ƙarfe-conductors acc.ku DIN 48201
Kayan abu
Jiki: Tagulla gami
Bolts: karfe ko bakin karfe Kwayoyi: DIN 934, Karfe Surface: maras rufi
| Samfura | Bolt Torque | Range Mai Gudanarwa mm2 | Girman mm OD | Na/ Girman Bolts |
| CU6-70-2 | 20 nm | 6 zu70 | 2.7 zuwa 10.5 | 2×M8 |
| Saukewa: CU16-95-2 | 20 nm | 16 zu95 | 5.1 zuwa 12.5 | 2×M8 |
| Saukewa: CU16-150-2 | 30 nm | 16 zuwa 150 | 5.1 zuwa 15.7 | 2×M10 |
| Saukewa: CU150-240-2 | 40 nm | 150 zuwa 240 | 15.7 zuwa 20.3 | 2×M12 |
| CU300-400-3 | 40 nm | 300 zuwa 400 | 22.6 zuwa 26.7 | 3×M12 |
